Plug-in solar and permits: what the state laws say about codes and local rules
No state plug-in law this site has read says a permit is required. 5 of the 10 say building, fire or local codes still apply, some only in part: Maine for a structure you do not own, Vermont for public buildings, and New Hampshire once its code section takes effect. New Jersey goes furthest: from March 1, 2027 a municipality may not require a permit to place or use a device, though building modification and electrical work stay under the codes. How local rules apply to your home is for your local building department and a licensed electrician to say. Checked October 2, 2026.
Permits and codes, state by state
Each of these laws exempts a qualifying device from utility interconnection requirements, and some also from utility approvals and fees. That exemption is about the utility. It does not settle what your city's building department may ask, which is what this table covers.
| State | In the law | What it says | Source |
|---|---|---|---|
| California | Not addressed | The law does not address local permits. Its exemption is from "interconnection requirements" only. A device must meet the most recent National Electrical Code and the California Electrical Code to count as a portable solar generation device. | Public Utilities Code 8530(c)(4) and 8531(a) |
| Colorado | Codes still apply | Installation must be in accordance with fire code requirements and applicable local building codes that pertain to health and safety. The text does not use the word permit. A device of 391 W or less is exempt only from some installation rules and from building safety code or product listing provisions that would require alterations to the building's wiring. | C.R.S. 40-2-140 (5) and (9) |
| Connecticut | Codes still apply | Nothing in the section exempts the device from the State Building Code, the Fire Safety Code, the State Fire Prevention Code or any provision of a local ordinance or regulation applicable to such devices. | Public Act 26-127, section 9 (b) |
| Maine | Codes still apply | A customer installing on a structure they do not own must not violate any state or local building, fire or zoning code. Above 420 W the law requires a licensed electrician and a dedicated single-outlet circuit. The word permit does not appear. | 35-A M.R.S.A. 3475 |
| Maryland | Not addressed | The law does not address permits or codes for the device. Its exemption covers the net metering and interconnection sections only. The same Act separately regulates county and municipal permitting of residential solar energy systems, and does not say whether a portable device is one. | Public Utilities Article 7-321 |
| New Hampshire | Codes still apply | A system must be installed and operated in accordance with the state building code and the manufacturer's instructions. That section is not in force until the Department of Energy files a certification, which the official RSA page did not show on October 2, 2026. The rest of the law starts on January 1, 2027. | RSA 155-A:16 |
| New Jersey | Limits on local bans | A municipality may not prohibit the use of a device on residential property and may not require a permit, application, fee, license or other approval for placing or using it. Building modification, electrical work or other alteration must still meet the National Electrical Code, the State Uniform Construction Code and any municipal permit or inspection requirements. | S2368 section 4 |
| Utah | Not addressed | The law does not address local permits. Its exemption is from utility interconnection and net metering. The device must meet the most recent National Electrical Code and be certified by a nationally recognized testing laboratory. | Utah Code 54-15-601 and 54-15-102(13) |
| Vermont | Codes still apply | The law does not address permits for a home. In a public building, which includes rentals, condominiums and cooperatives, use must comply with the Fire and Building Safety Code. Municipal zoning bylaws may not regulate the device. | 30 V.S.A. 256(f) |
| Virginia | Limits on local bans | From January 1, 2027, a locality may not prohibit use of a device on a residential structure, subject to height and setback requirements and historic or architectural districts. The law does not address permits for the device itself. | Va. Code 15.2-2288.7 and 56-596.8 |
Does the National Electrical Code cover plug-in solar?
No. UL Solutions, a safety testing and certification company, says: The 2026 NEC, like all previous editions, does not recognize the use of plug-in photovoltaic (PIPV) modules.
Even so, California, Connecticut, Utah and Virginia make meeting the National Electrical Code a condition of the device. This site cannot tell you how a local inspector will read a requirement to meet a code that does not recognize the device. Read UL Solutions on the 2026 code, and take the outlet and circuit checklist to your electrician.
What to ask before you install
- Your local building department: whether it wants a permit, a plan or an inspection for a plug-in device, and for a mounting on a railing, wall or the ground.
- A licensed electrician: whether the outlet and the circuit behind it suit a source feeding back into them.
- Your landlord, HOA or condo association, if you rent or share a building: they may have rules the state law does not override.
This site cannot check your city's permit rules, so it does not state any.
State laws side by side · Do you have to tell your utility? · Check your kit against your state's limit
Last updated .