Plug-in solar for renters, flats and leaseholders
The 2026 rules give renters and leaseholders no right to install plug-in solar. They make it possible in Great Britain, but if you rent, or live in a flat or managed building, someone else may have to say yes first. This page lists who to ask and where a kit must not go. Last checked 5 October 2026.
Who to ask
- Renters: ask your landlord before you buy. Get the answer in writing. That is our advice, not a rule in the sources. The landlord letter fills in a request with your kit.
- Leaseholders: ask your freeholder and managing agent, and read your lease.
- Anyone fixing panels outside: ask the council if planning permission or listed building consent may be needed (planning permission by nation).
In the government's words, before buying or installing, check whether any permissions are required, "from a landlord and/or building owner or freeholder permission, planning permission or listed building consent", and "Decisions on whether to approve requests are a matter for landlords, freeholders or councils".
What the Energy Saving Trust says
The Energy Saving Trust wrote its checklist with the government. It says: Get permission from whoever's responsible for the building before buying. This could be your landlord, freeholder or building manager (property manager in Scotland).
For a flat you own, it says to check your lease for: Needing permission to fix equipment to your balcony, external walls, roof, railings or communal areas.
It also warns that if you install a kit without permission, you may have to remove it and pay for any damage.
The Planning Portal adds: Note - If you are a leaseholder you may need to get permission from your landlord, freeholder or management company.
Where the kit must not go
- On aluminium composite, metal composite, high pressure laminate or timber cladding.
- On timber balconies.
- On buildings under external wall or building safety remediation.
- On a wall or part of the building that forms a boundary between dwellings.
These exclusions come from the product specification. Fixings must also be reversible, not permanent. Cable ties, rope, string, tape, bungee cords or straps on their own are not permitted as the mounting.
One kit per household
Each dwelling with its own consumer unit counts as a separate household. So each flat in a block can have one kit, if its own permissions allow. You also have to tell your network operator, and check your insurance.
Sources
- Plug-in Solar Device Interim Product Specification, version 2.0 (July 2026), Department for Energy Security and Net Zero.
- Plug-in solar: government response (July 2026), Department for Energy Security and Net Zero.
- Households can save as plug-in solar panels come to market (26 August 2026), GOV.UK.
- Plug-in solar: final stage impact assessment (DESNZ024(F)-26-CP30), Department for Energy Security and Net Zero.
- Plug-in solar panels: checks to make before you buy (written with DESNZ, updated 1 October 2026), Energy Saving Trust. The site blocks automated reads, so the page was read in a browser. The location-specific versions and three collapsed answers were not read.
- Planning permission: solar equipment mounted on a house or a block of flats or on a building within the curtilage, Planning Portal.
Last updated .