What to check before you buy a plug-in solar kit (UK)
Before you pay for a plug-in solar kit, ask the seller two questions. Does it meet the government's Plug-in Solar Device Interim Product Specification (version 2.0)? Is it on the Energy Networks Association (ENA) Type Test Register, the list of devices on the ENA Connect Direct platform? This page lists what the specification says the maker must supply, so you can check the box, the label and the instructions. It is a buyer's checklist, not a safety assurance.
Is the kit on the register and marked as compliant?
A kit has to comply with the product specification. Before it goes on sale, the maker must register the device on the ENA Type Test Register and get confirmation that it has been assessed as compliant. A device that has only been submitted for registration does not count as compliant.
- Ask the seller to show the register listing for the exact model you are buying.
- Check that the product is marked with a statement that it complies with the specification.
- Check that a durable label comes with it, to fix at or near your consumer unit (fuse box) to show that a plug-in solar device is installed.
Sources: Department for Energy Security and Net Zero, legislation.gov.uk
Does the size fit the limits?
The law caps the inverter at 800 W AC. The specification also limits the kit to 800 VA of apparent power and 3.5 A at the point of connection, and the panels to 2,000 W in total.
- Up to four panels, with no more than two wired in series.
- With more than 960 W of panels, the maker must advise you to consider a professional assessment of your wiring before you install.
- Compare the inverter's AC rating and your panel total with these figures.
Sources: legislation.gov.uk, Department for Energy Security and Net Zero
What should the plug and the box include?
The specification sets rules for the plug, the panels (it calls them modules) and the mounting. Check what comes in the box against this list.
- A non-rewireable, moulded BS 1363 plug (the standard UK three-pin plug) with a fuse of 5 A or less.
- Panels that can be removed from the maker's mounting without a professional tool.
- Mounting that does not rely only on cable ties, rope, string, adhesive tape, bungee cords or straps.
- For an outdoor socket, plugs and sockets rated IP55 or better.
What must the instructions say?
Ask to read the instructions before you buy. The specification asks the maker to include each of these points.
- Extension cables, multi-way adaptors, RCD adaptors and travel adaptors are not permitted.
- Check that your home has modern residual current protection (RCBOs) and is in good condition. If it has older fuses and no RCBOs, a professional electrician should check it first.
- A statement that telling your network operator about connection and disconnection is mandatory, with a link to instructions on how to do it.
- A prominent warning that the kit is not meant to be connected to, or used with, a battery energy storage system.
- Any testing or changes to the building's electrical system must be done by a professional electrician.
What is left for you to check?
Some checks sit with you, not the maker.
- One kit per household. The network rules allow one plug-in kit per home, and a dwelling with its own consumer unit counts as its own household.
- Permission. You are responsible for any permission from a landlord, freeholder, managing agent or council, including planning permission and listed building consent.
- Where it goes. The specification does not permit kits on aluminium composite, metal composite, high pressure laminate or timber cladding, on timber balconies, or on buildings under external wall or building safety remediation.
- Insurance. You are responsible for checking whether the kit may affect your own insurance and any insurance covering the building.
- Notice. Tell your network operator when you plug in, no later than 28 days after.
Sources: Department for Energy Security and Net Zero, Ofgem, Energy Networks Association, via dcode.org.uk, legislation.gov.uk, GOV.UK
This list shows what the specification asks makers to supply. It cannot tell you that a particular kit, socket or home is safe or lawful to use. If a seller cannot show the register listing, the label or the instructions, do not buy that kit. If you are unsure about your wiring or sockets, ask a qualified electrician.
The UK rules in full · Socket and circuit checklist · Kits listed on the UK register, with prices · Check your kit against the limits
Sources
- Plug-in Solar Device Interim Product Specification, version 2.0 (July 2026), Department for Energy Security and Net Zero.
- The Plugs and Sockets etc. (Safety) Regulations 1994 and Electricity Safety, Quality and Continuity Regulations 2002 (Amendment) Regulations 2026, SI 2026/848, legislation.gov.uk.
- Electricity Safety, Quality and Continuity Regulations 2002, regulation 22, legislation.gov.uk.
- Ofgem decision to approve DCRP/MP/26/02, proposed amendment to facilitate plug-in microgeneration (11 August 2026), Ofgem.
- Engineering Recommendation G98 Issue 2 Amendment 1, consultation draft (June 2026), Energy Networks Association, via dcode.org.uk. The final text was not found online on the checked date. Form names and wording come from the June draft; Ofgem says later changes were limited to clarifications, simpler customer forms, implementation arrangements and minor edits.
- Households can save as plug-in solar panels come to market (26 August 2026), GOV.UK.
Last updated .